Difference between revisions of "Adding Taxa to PaleoDB"

From phenoscape
(Adding taxon names)
 
(5 intermediate revisions by one other user not shown)
Line 1: Line 1:
 
=Introduction=
 
=Introduction=
 +
 +
This page discusses the procedure for adding taxa to the PaleoDB (aka PBDB) via the web interface.  It is mostly meant as a reference as you should have received training from the authorized person supervising your data entry.  Note, as mentioned below, that names entered into the PaleDB do not automatically appear in the Vertebrate Taxonomy Ontology (VTO), instead you will need to request an update be made to the VTO, either as a tracker request, or directly to the taxonomy curator.
  
 
=Adding taxon names=
 
=Adding taxon names=
 
#Go to [http://paleodb.org paleodb.org]
 
#Go to [http://paleodb.org paleodb.org]
 
#Login (link at the upper right corner of the startup window).  If you are not registered as a contributor, you should specify your supervisor (e.g., Paula or Wasila) as the authorizer, and your name (lastname, first initial, followed by period e.g., Midford, P.) as enterer.  This will take you to the Main Menu.
 
#Login (link at the upper right corner of the startup window).  If you are not registered as a contributor, you should specify your supervisor (e.g., Paula or Wasila) as the authorizer, and your name (lastname, first initial, followed by period e.g., Midford, P.) as enterer.  This will take you to the Main Menu.
#The first step is to double check that the taxon is not in PaleoDB.  Every (chordate) taxon in PaleoDB should be in VTO, but there may be a few that have been added since the last time the VTO was updated from the PaleoDB.  In the ‘Data entry’ column under the heading ‘Basic steps’, click the ‘Add/edit taxon name’ link.  This will take you to a page called ‘Enter the taxon’s full name’.  Enter the name in the Taxon name field (e.g., Loganellia scotica) and click Search.
+
#The first step is to double check that the taxon is not in PaleoDB.  Every (chordate) taxon in PaleoDB should be in VTO, but there may be a few that have been added since the last time the VTO was updated from the PaleoDB.  In the ‘Data entry’ column under the heading ‘Basic steps’, click the ‘Add/edit taxon name’ link.  This will take you to a page called ‘Enter the taxon’s full name’.  Enter the name in the Taxon name field (e.g., ''Loganellia scotica'') and click Search.
 
#*If a match is found, then we don’t need to worry about it and when we add PBDB to the VTO the name should appear in Phenex.  If the name is already in PBDB, then we don't need to worry unless the containing taxa are not listed in PBDB.  If there are no containing taxa, the VTO update process will attach taxon directly under chordata (which is the default root in our VTO build scripts).
 
#*If a match is found, then we don’t need to worry about it and when we add PBDB to the VTO the name should appear in Phenex.  If the name is already in PBDB, then we don't need to worry unless the containing taxa are not listed in PBDB.  If there are no containing taxa, the VTO update process will attach taxon directly under chordata (which is the default root in our VTO build scripts).
 
#*If a match is not found, then the Reference search page will appear.  The reference to search for is the paper that you are curating (not the publication where the taxon was originally described!)  You can search by simply entering the author and PBDB to make sure the reference isn’t already there.  You don’t need to specify year or title in the search, but if the author has lots of publications already in the database, adding one of this will shorten the list of returned results.  Click Search.  The resulting page will display a list of matches.
 
#*If a match is not found, then the Reference search page will appear.  The reference to search for is the paper that you are curating (not the publication where the taxon was originally described!)  You can search by simply entering the author and PBDB to make sure the reference isn’t already there.  You don’t need to specify year or title in the search, but if the author has lots of publications already in the database, adding one of this will shorten the list of returned results.  Click Search.  The resulting page will display a list of matches.
Line 10: Line 12:
 
#Fill out the form.  Enter the first author last name and initials - the format requires periods and spaces between the initials. Enter the second author in the same way.  Additional authors with or without initials.  Don’t put ‘and’ before the final author’s name.  Project code can be left blank.  Pay careful attention to the “Taxonomy” drop down (most will be ‘stated with evidence’  or ‘stated without evidence’).  For most phylogenetic studies, the correct choice will be ‘stated with evidence.’  There are two links to pop-up tip sheets that explain how the PBDB administrators expect data to be entered.
 
#Fill out the form.  Enter the first author last name and initials - the format requires periods and spaces between the initials. Enter the second author in the same way.  Additional authors with or without initials.  Don’t put ‘and’ before the final author’s name.  Project code can be left blank.  Pay careful attention to the “Taxonomy” drop down (most will be ‘stated with evidence’  or ‘stated without evidence’).  For most phylogenetic studies, the correct choice will be ‘stated with evidence.’  There are two links to pop-up tip sheets that explain how the PBDB administrators expect data to be entered.
 
#Once you hit the submit button, it will take you to a page that summarizes the reference you added.  Now you can add the taxon name.  There is a link to ‘Add or edit all the taxon names’.  Click that link and a popup page called ‘Enter the taxon’s full name’ will appear.  Search again for the taxonomic name you want to enter. If the taxonomic name is not in PaleoDB, you should search for and record the name with the highest taxonomic rank (e.g., if species you are entering does have its family entered yet, start with the family, then the genus, then the species).  Clicking search will take you to a page titled ‘Authority data for [taxon name].’
 
#Once you hit the submit button, it will take you to a page that summarizes the reference you added.  Now you can add the taxon name.  There is a link to ‘Add or edit all the taxon names’.  Click that link and a popup page called ‘Enter the taxon’s full name’ will appear.  Search again for the taxonomic name you want to enter. If the taxonomic name is not in PaleoDB, you should search for and record the name with the highest taxonomic rank (e.g., if species you are entering does have its family entered yet, start with the family, then the genus, then the species).  Clicking search will take you to a page titled ‘Authority data for [taxon name].’
#The first step is to specify (with the radio buttons) whether the taxon was named in the data record’s primary reference or in an earlier publication.  For example, the taxon Loganellia scotica was references in Wilson and Marss 2004, but was originally described and named in Traquair 1898.  In this case the second radio button is the appropriate choice.  At a minimum, the original author and year should be entered.  You must also specify whether this taxon is extant (living).  Additional information, such as ‘type specimen’, preservation category, type locality, etc. are optional and not recorded for Phenoscape taxa.  Then you will reach a page that indicates that your taxon has been entered in the database.
+
#The first step is to specify (with the radio buttons) whether the taxon was named in the data record’s primary reference or in an earlier publication.  For example, the taxon ''Loganellia scotica'' was referenced in Wilson and Mars (2004), but was originally described and named in Traquair 1898.  In this case the second radio button is the appropriate choice.  At a minimum, the original author and year should be entered.  You must also specify whether this taxon is extant (living).  Additional information, such as ‘type specimen’, preservation category, type locality, etc. are optional and not recorded for Phenoscape taxa.  Then you will reach a page that indicates that your taxon has been entered in the database.
 
 
  
 
=Adding published taxonomic opinions=
 
=Adding published taxonomic opinions=
 +
Next you’ll enter the taxonomic opinion on the parent of the taxon.
 +
#Click on Add this author’s taxonomic opinion. Usually, it will be repeated from the original description. It will look up the parent taxa after you press submit.
  
 +
=Adding unpublished opinions=
  
 
+
#Go to the "Add reference" form.
=Adding unpublished opinions=
+
#Add the author(s) name in the author fields, the current year in the year field, and a proxy title such as "Personal communication regarding placoderm taxonomy."
 +
#Select "unpublished" as the publication type (there's no "personal communication" category because that would be splitting hairs).
 +
#Select "stated with evidence" as the "taxonomy" value. Otherwise, the opinions would be trumped by earlier-published "with evidence" opinions.
 +
#Don't worry about the serial name, volume, issue number, first page, or last page. These fields are actually optional.
  
 
[[Category:Taxonomy]]
 
[[Category:Taxonomy]]
 
[[Category:Curation]]
 
[[Category:Curation]]

Latest revision as of 18:27, 16 July 2012

Introduction

This page discusses the procedure for adding taxa to the PaleoDB (aka PBDB) via the web interface. It is mostly meant as a reference as you should have received training from the authorized person supervising your data entry. Note, as mentioned below, that names entered into the PaleDB do not automatically appear in the Vertebrate Taxonomy Ontology (VTO), instead you will need to request an update be made to the VTO, either as a tracker request, or directly to the taxonomy curator.

Adding taxon names

  1. Go to paleodb.org
  2. Login (link at the upper right corner of the startup window). If you are not registered as a contributor, you should specify your supervisor (e.g., Paula or Wasila) as the authorizer, and your name (lastname, first initial, followed by period e.g., Midford, P.) as enterer. This will take you to the Main Menu.
  3. The first step is to double check that the taxon is not in PaleoDB. Every (chordate) taxon in PaleoDB should be in VTO, but there may be a few that have been added since the last time the VTO was updated from the PaleoDB. In the ‘Data entry’ column under the heading ‘Basic steps’, click the ‘Add/edit taxon name’ link. This will take you to a page called ‘Enter the taxon’s full name’. Enter the name in the Taxon name field (e.g., Loganellia scotica) and click Search.
    • If a match is found, then we don’t need to worry about it and when we add PBDB to the VTO the name should appear in Phenex. If the name is already in PBDB, then we don't need to worry unless the containing taxa are not listed in PBDB. If there are no containing taxa, the VTO update process will attach taxon directly under chordata (which is the default root in our VTO build scripts).
    • If a match is not found, then the Reference search page will appear. The reference to search for is the paper that you are curating (not the publication where the taxon was originally described!) You can search by simply entering the author and PBDB to make sure the reference isn’t already there. You don’t need to specify year or title in the search, but if the author has lots of publications already in the database, adding one of this will shorten the list of returned results. Click Search. The resulting page will display a list of matches.
  4. If there is no match for the publication, click on the ‘Main menu’ item in the upper left. To record a new reference, click the ‘Add new reference’ in the ‘Basic steps’ area. This will take you to a Duplicate reference search page. Enter the name as on the Reference search page and hit the ‘Search’ button. When the list of references add, click the ‘Add’ button (since the reference shouldn’t be in this list). This will take you to the ‘New reference form’ page.
  5. Fill out the form. Enter the first author last name and initials - the format requires periods and spaces between the initials. Enter the second author in the same way. Additional authors with or without initials. Don’t put ‘and’ before the final author’s name. Project code can be left blank. Pay careful attention to the “Taxonomy” drop down (most will be ‘stated with evidence’ or ‘stated without evidence’). For most phylogenetic studies, the correct choice will be ‘stated with evidence.’ There are two links to pop-up tip sheets that explain how the PBDB administrators expect data to be entered.
  6. Once you hit the submit button, it will take you to a page that summarizes the reference you added. Now you can add the taxon name. There is a link to ‘Add or edit all the taxon names’. Click that link and a popup page called ‘Enter the taxon’s full name’ will appear. Search again for the taxonomic name you want to enter. If the taxonomic name is not in PaleoDB, you should search for and record the name with the highest taxonomic rank (e.g., if species you are entering does have its family entered yet, start with the family, then the genus, then the species). Clicking search will take you to a page titled ‘Authority data for [taxon name].’
  7. The first step is to specify (with the radio buttons) whether the taxon was named in the data record’s primary reference or in an earlier publication. For example, the taxon Loganellia scotica was referenced in Wilson and Mars (2004), but was originally described and named in Traquair 1898. In this case the second radio button is the appropriate choice. At a minimum, the original author and year should be entered. You must also specify whether this taxon is extant (living). Additional information, such as ‘type specimen’, preservation category, type locality, etc. are optional and not recorded for Phenoscape taxa. Then you will reach a page that indicates that your taxon has been entered in the database.

Adding published taxonomic opinions

Next you’ll enter the taxonomic opinion on the parent of the taxon.

  1. Click on Add this author’s taxonomic opinion. Usually, it will be repeated from the original description. It will look up the parent taxa after you press submit.

Adding unpublished opinions

  1. Go to the "Add reference" form.
  2. Add the author(s) name in the author fields, the current year in the year field, and a proxy title such as "Personal communication regarding placoderm taxonomy."
  3. Select "unpublished" as the publication type (there's no "personal communication" category because that would be splitting hairs).
  4. Select "stated with evidence" as the "taxonomy" value. Otherwise, the opinions would be trumped by earlier-published "with evidence" opinions.
  5. Don't worry about the serial name, volume, issue number, first page, or last page. These fields are actually optional.