Difference between revisions of "Help:Contents"

From phenoscape
Line 1: Line 1:
Documentation of how-to and frequently asked questions and answers as they pertain to meetings hosted at and/or sponsored by NESCent. These will frequently be duplicates from other HowTos or FAQs.
+
Various how-to questions and instructions for IT-related matters.
  
==Getting IT Help==
+
==Request help from IT==
  
===Who is the system administrator===
+
Post a ticket to the [mailto:support@nescent.org RT ticket system]. Indicate if the issue is urgent or high-priority. Issues that prevent you from doing your work are high-priority. Use a concise subject for the email.
  
[mailto:jonauman@nescent.org Jon Auman] is NESCent's sysadmin and located in office A212. His phone number is 919-668-9104.
+
RT will issue you a username and password upon your first ticket. Please [https://help.nescent.org/ log into RT] and change your password to one you can easily recall.
  
===How to get help for IT-related problems===
+
You can also create tickets [https://help.nescent.org/ directly in RT] if you have received a username and password previously.
  
Send an email to [mailto:support@nescent.org support@nescent.org] with a succinct description of the problem in the subject. Your email will automatically be entered into an issue tracking system called RT, which will issue you a username and password upon your first ticket. You may ignore this account as RT can handle all ticket-related communication through its email gateway. If desired, you can use your account to obtain a full display of your ticket's history with all communication.
+
In case of an emergency, stop by Jon Auman's office during working hours, or call the IT emergency number 919-668-9105 (89105 from within NESCent) during off-hours. It will ring to the NESCent IT person on call, currently usually Jon Auman.
  
If you need help immediately, stop by [mailto:jonauman@nescent.org Jon Auman's] office (A212) during working hours, or call the IT emergency number 919-668-9105 (89105 from within NESCent) during off-hours. It will ring to the NESCent IT person on call, currently usually Jon Auman.
+
If you don't need immediate attention to your problem, creating a trouble ticket is the  best way of making sure your issue will be tracked, communicated, and resolved, as well as providing us with the ability to allocate our time most effeciently.  
  
==Using NESCent's shared office==
+
==Getting set up==
  
===Using the printers===
+
===Obtain a Duke NetID ===
  
NESCent has shared B/W and Color printers located in the "mail room" (the open room adjacent to the kitchen. To use them, setup the printers as IP printers:
+
The  Duke NetID is an electronic alphanumeric identifier that authenticates users to systems and services on the Duke computing network. For example, it is used to authenticate you for using the [[Cluster Nodes|high-performance compute cluster nodes]], and in the future we will also use it for authenticating users to internal applications and web resources. For NESCent fellows, the NetID will usually be associated with an email address <NetID>@duke.edu as well.
  
====NESCent Black White printer (HP LaserJet 4250)====
+
Regulary paid fellows will automatically get a NetID assigned once their records are in the Duke system. Contact the OIT Help Desk at 684-2200 if you have not been notified about your NetID but should have.
IP Address: 152.3.59.89
 
  
;In Windows:
+
Duke also can create NetIDs for "anyone formally associated with Duke as long as they are sponsored by a Duke sponsor." Please see [mailto:khenry@nescent.org Karen Henry] if you need to be sponsored, or if you need to sponsor visitors for receiving a NetID. The information needed from each person to be issued a NetID is documented on the [http://www.oit.duke.edu/helpdesk/netid/index.html#s5 OIT helpdesk page for NetIDs]. The Duke sponsor needs to email the information for each sponsored person to dukeid@duke.edu. Please allow 1-2 weeks of advance processing time for bulk requests. If the NetIDs are needed for access to the compute cluster, [mailto:jonauman@nescent.org Jon Auman], NESCent's [http://www.csem.duke.edu/Cluster/ DSCR] liaison, needs to transmit the NetIDs to be granted access to the HPC staff. Allow an additional week for this step to complete.
 +
 
 +
===Setup Duke Email===
 +
The Duke mail server settings for an email client are:
 +
 
 +
*Incomming mail server address: ... imap.duke.edu<br>
 +
Ensure that the connection is set to "SSL." This will change the port number to 993 instead of 143.
 +
*Outgoing mail server address: ...... smtp.duke.edu<br>
 +
If you are on campus, you should use this address with port number 25<br>
 +
If you are off campus, you have two choices:<br>
 +
* If you are setting this up on a laptop, use smtp.duke.edu and set the connection to use "SSL"
 +
* If you are setting this up on a desktop, use your Internet Service Provider's (ISP) outgoing mail server address.<br>
 +
EXAMPLE: If your ISP is Road Runner, the address is smtp-server.nc.rr.com<br>
 +
All ISPs have this address usually posted in their FAQs or help sections.
 +
 
 +
===Get on the NESCent internal mailing list===
 +
 
 +
Sign up with your email address [http://lists.nescent.org/mailman/listinfo/internal on the subscription page].
 +
 
 +
Long term science visitors and staff, including students, will be signed up automatically to this mailing list, and also to the postdocs or sabbatical scholars list if appropriate.
 +
 
 +
For students, please send an email to help@nescent.org once a student leaves so that IT can remove him/her from the internal mailing list.
 +
 
 +
==Install the NESCent shared B/W and color printers==
 +
 
 +
Setup the printers as IP printers:
 +
 
 +
===NESCent Black White printer (HP LaserJet 4250)===
 +
IP Address: 152.3.58.89
 +
 
 +
==== In Windows: ====
  
 
First download a driver and run the exe. You can download it here:<br>
 
First download a driver and run the exe. You can download it here:<br>
http://internal.nescent.org/software/hp/lj4250pcl6win2kxp2003.exe
+
http://internal.nescent.org/software/printers/HP4250/lj4x50pcl6win2kxp2003.exe
  
 
By default. it will unzip the drivers to this location:<br>
 
By default. it will unzip the drivers to this location:<br>
Line 49: Line 78:
 
# Hit Next & Finish if necessary
 
# Hit Next & Finish if necessary
  
====NESCent Color printer (HP LaserJet 4650)====
+
==== IN OSX ====
 +
 
 +
As long as you are on the WIRED network, you will be able to see the NESCent printers via Bonjour/Rendezvous service. However, this will not work under wireless. Therefore, I recommend setting up the printer as a LPD printer.
 +
 
 +
# Go to System Preferences>Print & Fax
 +
# Hit the + sign in the bottom left hand of the screen (to add a printer)
 +
# For protocol, choose Line Printer Daemon - LPD
 +
# For address, type 152.3.58.89
 +
# You can leave queue blank
 +
# The name will default to IP address, but i like to make it more meaningful, like "NESCent B&W HP 4250"
 +
# Print using : click on HP, then click on HP Laserjet 4250
 +
# Click on Add.
 +
# In the next screen, click on duplex continue.
 +
# Click continue, and you're done.
 +
 
 +
===NESCent Color printer (HP LaserJet 4650)===
 
IP Address : 152.3.58.90
 
IP Address : 152.3.58.90
 +
 +
==== In Windows ====
  
 
First download a driver and run the exe. You can download it here:<br>
 
First download a driver and run the exe. You can download it here:<br>
http://internal.nescent.org/software/hp/clj4650pcl6win2kxp2003.exe
+
http://internal.nescent.org/software/printers/HP4650/clj4650pcl6win2kxp2003.exe
  
 
By default. it will unzip the drivers to this location:<br>
 
By default. it will unzip the drivers to this location:<br>
Line 62: Line 108:
 
Use HP LaserJet 4650 PCL6 as the model
 
Use HP LaserJet 4650 PCL6 as the model
  
===Using the scanner===
+
==== IN OSX ====
  
The copier in the mail room doubles as scanner. You can have scans emailed to an address of your choice. Please follow the step-by-step instructions located on the left hand side of the copier.
+
As long as you are on the WIRED network, you will be able to see the NESCent printers via Bonjour/Rendezvous service. However, this will not work under wireless. Therefore, I recommend setting up the printer as a LPD printer.
  
===Using the shared workstation===
+
# Got to System Preferences>Print & Fax
 +
# Hit the + sign in the bottom left hand of the screen (to add a printer)
 +
# For protocol, choose Line Printer Daemon - LPD
 +
# For address, type 152.3.58.90
 +
# You can leave queue blank
 +
# The name will default to IP address, but i like to make it more meaningful, like "NESCent B&W HP 4250"
 +
# Print using : click on HP, then click on HP Color Laserjet 4650
 +
# Click on Add.
 +
# In the next screen, click on duplex continue.
 +
# Click continue, and you're done.
  
==Connecting to the wireless or wired network==
+
==File Shares==
  
===Locating network jacks===
+
===Connecting to NESCent WebDAV server===
Each conference room has network jacks to plug standard ethernet cable (CAT5) into. The large conference space has network jacks in the back.
 
  
In order to use the wired network, your network card has to be registered with Duke. You need a Duke NetID to register a card, so as a meeting participant typically you cannot do this step yourself. See [[#Registering network cards|below]] for how to get your card registered if it is not already.
+
The general URL is:
 +
<nowiki>https://webdav.nescent.org/[sharename]</nowiki>
  
===Wireless Coverage===
+
====MAC OS X====
Conference rooms, breakout spaces, and all offices are covered by a wireless access point of the DUKE network, too. This network is operated by Duke University (surprise!).  
+
# In finder > Go > Connect to Server
 +
# Type in <nowiki>https://webdav.nescent.org/[sharename]</nowiki>
 +
#* For example, <nowiki>https://webdav.nescent.org/driade</nowiki>
 +
# Accept security warning about certificate
 +
# enter username and password
  
There is no password or encryption required to connect, however, your network card needs be registered with Duke. You need a Duke NetID to register a card, so as a meeting participant typically you cannot do this step yourself. See [[#Registering network cards|below]] for how to get your card registered if it is not already.
+
====Windows XP====
 +
# Go to "My Network Places"
 +
# Add a Network Place (pulls up wizard)
 +
# Click Next twice
 +
# In internet or Network address box, type in <nowiki>https://webdav.nescent.org/[sharename]/#</nowiki>
 +
#* For example, <nowiki>https://webdav.nescent.org/driade/#</nowiki>
 +
#* (there is a bug in MS implementation of webdav client. In fact, Internet explorer and this method use two different means of connecting to webdav. go figure. Therefore, you must suffix the URL with the pound sign as a workaround to the bug.
 +
# Accept certificate warning, if given.
 +
# Give the share a meaningful name. Default is usually fine.
 +
# Finish
  
===Registering network cards===
+
===Map a network drive in Windows XP===  
  
Network cards need to be registered to [http://www.oit.duke.edu Duke OIT] in order to connect to the internet. To register your card, we need its [http://en.wikipedia.org/wiki/MAC_address MAC address]. Normally, providing your MAC address is part of the meeting preparation in advance. If you couldn't provide the address before, below is how to obtain it. Write down the address and drop it off at the system administrator, [mailto:jonauman@nescent.org Jon Auman], in room A212.
+
''(this should only be done if you are at the NESCent facility)''
 +
 +
# open "My Computer"
 +
# click on "Tools" > "Map Network Drive"
 +
# choose the drive letter you prefer and type the name of the share in "Folder:" 
 +
# check "Reconnect at logon" if you would like.
 +
# click "finish"
  
====Obtaining the MAC address on Windows====
+
==Register a computer to the Duke wired or wireless network==
 +
 
 +
===Obtaining the MAC (hardware) address===
 +
 
 +
Before you get started, you will need the user's MAC (aka hardware or physical) address.
 +
 
 +
====For Windows====
 
# Click the Start button
 
# Click the Start button
 
# Click Run
 
# Click Run
Line 123: Line 203:
 
: I need the physical addresses to set up your wireless connectivity. From the example above, my wireless address is 00-12-F0-55-F8-88 and my wired address is 00-11-43-76-94-3E.
 
: I need the physical addresses to set up your wireless connectivity. From the example above, my wireless address is 00-12-F0-55-F8-88 and my wired address is 00-11-43-76-94-3E.
  
====Obtaining the MAC address on Mac OSX====
+
====For Mac OSX====
 
# Go to System Preferences
 
# Go to System Preferences
 
# Click on Network
 
# Click on Network
Line 131: Line 211:
 
# Go back and repeat again for your wireless card address by clicking on AirPort from the show drop down box.
 
# Go back and repeat again for your wireless card address by clicking on AirPort from the show drop down box.
  
====Obtaining the MAC address on Linux====
+
====For Linux====
 
# Open up a terminal window
 
# Open up a terminal window
 
# Type /sbin/ifconfig
 
# Type /sbin/ifconfig
Line 147: Line 227:
 
: Use whatever comes after HWaddr. In this case, it is 00:A0:D1:E4:53:22
 
: Use whatever comes after HWaddr. In this case, it is 00:A0:D1:E4:53:22
  
==Use audio/video conferencing equipment==
+
=== Wireless access ===
 +
 
 +
I usually only register the wireless card for working groups and meetings unless the user cannot use wireless or really need wired for some reason.
 +
 
 +
# Go to [http://netreg.duke.edu/ http://netreg.duke.edu/] and click on "Enter".
 +
# Login with your NetID
 +
# Click "Register New Machine"
 +
# Under Select the Subnet, Select "TLS Wireless (152.3.149.0/24)"
 +
# Next to hostname, give it a name of your choice. I usually do like GMOD1, GMOD2, etc, using a shortname for the visiting working group. If it is a staff member, I usually use their name. The name cannot contain spaces and shouldonly contain alphanumeric characters.
 +
# Under hardware address, paste in the users MAC address (aka hardware address) for the wireless card.
 +
# Under affiliation, select "National Evolutionary Synthesis Center"
 +
# Hit Continue.
 +
# You are done, and can now logout.
 +
 
 +
Please allow about 5 minutes for the connection to become active. You may need to repair the network conneciton on windows, or deactivate and reactivate the airport under OS X.
 +
 
 +
=== Wired access ===
 +
 
 +
You should not need to do this very often, but here are the insturctions anyways.
 +
 
 +
# Go to [http://netreg.duke.edu/ http://netreg.duke.edu/] and click on "Enter".
 +
# Login with your NetID
 +
# Click "Register New Machine"
 +
# Under Select the Building, Select "Erwin Square Mill"
 +
# Next to hostname, give it a name of your choice. I usually do like GMOD1, GMOD2, etc, using a shortname for the visiting working group. If it is a staff member, I usually use their name. The name cannot contain spaces and shouldonly contain alphanumeric characters. Also, you may have a choice of which domain to use. First choice is aas.duke.edu, if not available, then bootp.duke.edu.
 +
# Under hardware address, paste in the users MAC address (aka hardware address) for the wired network card.
 +
# Under affiliation, select "National Evolutionary Synthesis Center"
 +
# Hit Continue.
 +
# You are done, and can now logout.
 +
 
 +
==Polycom==
  
 
===Use the audio PolyCom for teleconferencing===
 
===Use the audio PolyCom for teleconferencing===
Line 197: Line 307:
 
Use the black remote. Simply enter the IP address or IP name in the dialing field, and press the green call button at the upper left hand corner.
 
Use the black remote. Simply enter the IP address or IP name in the dialing field, and press the green call button at the upper left hand corner.
  
https://www.nescent.org/wg/images/Polycom7000-remote.png
+
[[Image:Polycom7000-remote.png]]
  
 
You can call up to 4 different sites at one time. This is called a mutlipoint call.  
 
You can call up to 4 different sites at one time. This is called a mutlipoint call.  
Line 235: Line 345:
 
# Press the purple content button (lower left corner of remote) on the Visual Concert VSX, or press Graphics or Camera on the remote control.
 
# Press the purple content button (lower left corner of remote) on the Visual Concert VSX, or press Graphics or Camera on the remote control.
  
https://www.nescent.org/wg/images/Polycom7000-connect-laptop.png
+
[[Image:Polycom7000-connect-laptop.png]]
  
 
To stop showing content using a Visual Concert VSX, press the purple button again.
 
To stop showing content using a Visual Concert VSX, press the purple button again.
Line 252: Line 362:
 
Xmeeting - you can install the latest version from [http://sourceforge.net/project/showfiles.php?group_id=74721&release_id=354710 the project's sourceforge site].
 
Xmeeting - you can install the latest version from [http://sourceforge.net/project/showfiles.php?group_id=74721&release_id=354710 the project's sourceforge site].
  
Once you've got it installed, the client will take you to a setup screen, in most cases defaults will work.<br>
+
* when the XMeeting Steup Assistant opens select "Continue"
 +
* in the Personal Information window enter your full name and select "Continue"
 +
* create a new location and select "Continue"
 +
* call the location name "NESCent" and select "Continue"
 +
* leave the bandwidth at "512" unless you know you are on a faster connection and select "Continue"
 +
* if XMeeting determines you are behind a NAT click "OK" otherwise skip the next step and select "Continue"
 +
** choose "use STUN" and select a server from the drop down box and click "Continue"
 +
* uncheck "enable SIP" and click "Continue"
 +
* choose "do not use a Gatekeeper" and click "Continue"
 +
* choose "do not use a Registrar" and click "Continue"
 +
* choose "enable video" and click "Continue"
 +
* choose "Finish"
 +
 
 
Next, type in 'video.nescent.org' (without quotes) in the address field and hit the connect button. You should be able to connect.  
 
Next, type in 'video.nescent.org' (without quotes) in the address field and hit the connect button. You should be able to connect.  
  
https://www.nescent.org/wg/images/Xmeeting-mainwindow.png
+
[[Image:Xmeeting-mainwindow.png]]
  
 
For further troubleshooting, you can read the documentation [http://xmeeting.sourceforge.net/manual/manual.html here].
 
For further troubleshooting, you can read the documentation [http://xmeeting.sourceforge.net/manual/manual.html here].
Line 265: Line 387:
 
Next, type in 'video.nescent.org' (without quotes) in the address field and hit the connect button. You should be able to connect.  
 
Next, type in 'video.nescent.org' (without quotes) in the address field and hit the connect button. You should be able to connect.  
  
https://www.nescent.org/wg/images/ohphonex-window.png
+
[[Image:ohphonex-window.png]]
  
 
For further troubleshooting, you can read the documentation [http://xmeeting.sourceforge.net/ohphoneX-docs/ohphoneX.html here].
 
For further troubleshooting, you can read the documentation [http://xmeeting.sourceforge.net/ohphoneX-docs/ohphoneX.html here].
Line 280: Line 402:
 
Next type in 'video.necent.org' in the call box and click on the phone icon.
 
Next type in 'video.necent.org' in the call box and click on the phone icon.
  
https://www.nescent.org/wg/images/Netmeeting.png
+
[[Image:Netmeeting.png]]
 +
 
 +
==Sympodium==
 +
The following directions where taken from the "Sympodium ID370 Interactive Pen Display Installation Guide" which can be downloaded here  [[Media:Sympodium ID370 Interactive Pen Display Installation Guide.pdf]]
 +
 
 +
===Software Installation===
 +
 
 +
* If you haven’t done so already, turn on the computer and the interactive pen display.
 +
* Close all open applications on the computer.
 +
* Insert the SMART Board software CD into the CD drive.
 +
:For most systems, the CD is self-starting. If the CD doesn’t start automatically: (Windows operating systems) select Start > Run, and enter x:\autorun.exe (where x: is your CD drive).
 +
:(Mac computers) open your CD drive, and double-click the install file.
 +
* Follow the on-screen instructions.
 +
:NOTE: You’ll have to use the connected keyboard and mouse, because the pen doesn’t work until the SMART Board tools are running.  If SMART Board software doesn’t recognize the interactive pen display, you may have to activate the port manually using an attached keyboard or mouse. For further information, read  the SMART Board software online Help. Also, if the interactive pen display is your secondary monitor, you may need to enable it in your Display Properties Control Panel.
  
==Rules for Travel==
+
===Hardware Connections===
  
===Non-U.S. Citizens===
+
[[Image:Sympodium ID370 Interactive Pen Display Quick Connect Guide.png]]
We would appreciate your letting us know if you are not a US citizen.  If you will be arriving from outside the United States, we will provide you with a formal letter of invitation briefly outlining the purpose of your visit.  This letter may be required during your travel to the US, and we encourage you to keep a copy with you.  Please send via email your office mailing address so that we can send the formal letter of invitation.  For all non-US citizens we will need to make a copy of your passport and I-94 and/or visa waiver during your visit.
 
  
 
[[Category:Help]]
 
[[Category:Help]]

Revision as of 19:39, 26 March 2007

Various how-to questions and instructions for IT-related matters.

Request help from IT

Post a ticket to the RT ticket system. Indicate if the issue is urgent or high-priority. Issues that prevent you from doing your work are high-priority. Use a concise subject for the email.

RT will issue you a username and password upon your first ticket. Please log into RT and change your password to one you can easily recall.

You can also create tickets directly in RT if you have received a username and password previously.

In case of an emergency, stop by Jon Auman's office during working hours, or call the IT emergency number 919-668-9105 (89105 from within NESCent) during off-hours. It will ring to the NESCent IT person on call, currently usually Jon Auman.

If you don't need immediate attention to your problem, creating a trouble ticket is the best way of making sure your issue will be tracked, communicated, and resolved, as well as providing us with the ability to allocate our time most effeciently.

Getting set up

Obtain a Duke NetID

The Duke NetID is an electronic alphanumeric identifier that authenticates users to systems and services on the Duke computing network. For example, it is used to authenticate you for using the high-performance compute cluster nodes, and in the future we will also use it for authenticating users to internal applications and web resources. For NESCent fellows, the NetID will usually be associated with an email address <NetID>@duke.edu as well.

Regulary paid fellows will automatically get a NetID assigned once their records are in the Duke system. Contact the OIT Help Desk at 684-2200 if you have not been notified about your NetID but should have.

Duke also can create NetIDs for "anyone formally associated with Duke as long as they are sponsored by a Duke sponsor." Please see Karen Henry if you need to be sponsored, or if you need to sponsor visitors for receiving a NetID. The information needed from each person to be issued a NetID is documented on the OIT helpdesk page for NetIDs. The Duke sponsor needs to email the information for each sponsored person to dukeid@duke.edu. Please allow 1-2 weeks of advance processing time for bulk requests. If the NetIDs are needed for access to the compute cluster, Jon Auman, NESCent's DSCR liaison, needs to transmit the NetIDs to be granted access to the HPC staff. Allow an additional week for this step to complete.

Setup Duke Email

The Duke mail server settings for an email client are:

  • Incomming mail server address: ... imap.duke.edu

Ensure that the connection is set to "SSL." This will change the port number to 993 instead of 143.

  • Outgoing mail server address: ...... smtp.duke.edu

If you are on campus, you should use this address with port number 25
If you are off campus, you have two choices:

  • If you are setting this up on a laptop, use smtp.duke.edu and set the connection to use "SSL"
  • If you are setting this up on a desktop, use your Internet Service Provider's (ISP) outgoing mail server address.

EXAMPLE: If your ISP is Road Runner, the address is smtp-server.nc.rr.com
All ISPs have this address usually posted in their FAQs or help sections.

Get on the NESCent internal mailing list

Sign up with your email address on the subscription page.

Long term science visitors and staff, including students, will be signed up automatically to this mailing list, and also to the postdocs or sabbatical scholars list if appropriate.

For students, please send an email to help@nescent.org once a student leaves so that IT can remove him/her from the internal mailing list.

Install the NESCent shared B/W and color printers

Setup the printers as IP printers:

NESCent Black White printer (HP LaserJet 4250)

IP Address: 152.3.58.89

In Windows:

First download a driver and run the exe. You can download it here:
http://internal.nescent.org/software/printers/HP4250/lj4x50pcl6win2kxp2003.exe

By default. it will unzip the drivers to this location:
c:\HP LaserJet 4x50
You'll need to know this later on.

  1. Start > Settings > Printers and Faxes
  2. Add a Printer
  3. Next
  4. Choose Local printer, uncheck automatically detect plug and play printers if selected.
  5. Select "create a new port" and Type of port : standard tcp/ip port
  6. Next > Next
  7. Printer name or IP address : 152.3.58.89
  8. Next
  9. default of "Standard: generic network card" is fine
  10. Next & Finish
  11. Select Have Disk
  12. Browse to the location where you unzipped the drivers (e.g. 'c:\HP LaserJet 4x50') and hit next
  13. Select the HP LaserJet 4250 PCL6
  14. Printer Name: whatever you want, i call the NESCent HP LJ4250-B&W
  15. Default printer? your choice
  16. Print test page? your choice
  17. Hit Next & Finish if necessary

IN OSX

As long as you are on the WIRED network, you will be able to see the NESCent printers via Bonjour/Rendezvous service. However, this will not work under wireless. Therefore, I recommend setting up the printer as a LPD printer.

  1. Go to System Preferences>Print & Fax
  2. Hit the + sign in the bottom left hand of the screen (to add a printer)
  3. For protocol, choose Line Printer Daemon - LPD
  4. For address, type 152.3.58.89
  5. You can leave queue blank
  6. The name will default to IP address, but i like to make it more meaningful, like "NESCent B&W HP 4250"
  7. Print using : click on HP, then click on HP Laserjet 4250
  8. Click on Add.
  9. In the next screen, click on duplex continue.
  10. Click continue, and you're done.

NESCent Color printer (HP LaserJet 4650)

IP Address : 152.3.58.90

In Windows

First download a driver and run the exe. You can download it here:
http://internal.nescent.org/software/printers/HP4650/clj4650pcl6win2kxp2003.exe

By default. it will unzip the drivers to this location:
c:\HP color LaserJet 4650
You'll need to know this later on.

Same as above, except use 152.3.58.90 for IP address.
Use HP LaserJet 4650 PCL6 as the model

IN OSX

As long as you are on the WIRED network, you will be able to see the NESCent printers via Bonjour/Rendezvous service. However, this will not work under wireless. Therefore, I recommend setting up the printer as a LPD printer.

  1. Got to System Preferences>Print & Fax
  2. Hit the + sign in the bottom left hand of the screen (to add a printer)
  3. For protocol, choose Line Printer Daemon - LPD
  4. For address, type 152.3.58.90
  5. You can leave queue blank
  6. The name will default to IP address, but i like to make it more meaningful, like "NESCent B&W HP 4250"
  7. Print using : click on HP, then click on HP Color Laserjet 4650
  8. Click on Add.
  9. In the next screen, click on duplex continue.
  10. Click continue, and you're done.

File Shares

Connecting to NESCent WebDAV server

The general URL is:

https://webdav.nescent.org/[sharename]

MAC OS X

  1. In finder > Go > Connect to Server
  2. Type in https://webdav.nescent.org/[sharename]
    • For example, https://webdav.nescent.org/driade
  3. Accept security warning about certificate
  4. enter username and password

Windows XP

  1. Go to "My Network Places"
  2. Add a Network Place (pulls up wizard)
  3. Click Next twice
  4. In internet or Network address box, type in https://webdav.nescent.org/[sharename]/#
    • For example, https://webdav.nescent.org/driade/#
    • (there is a bug in MS implementation of webdav client. In fact, Internet explorer and this method use two different means of connecting to webdav. go figure. Therefore, you must suffix the URL with the pound sign as a workaround to the bug.
  5. Accept certificate warning, if given.
  6. Give the share a meaningful name. Default is usually fine.
  7. Finish

Map a network drive in Windows XP

(this should only be done if you are at the NESCent facility)

  1. open "My Computer"
  2. click on "Tools" > "Map Network Drive"
  3. choose the drive letter you prefer and type the name of the share in "Folder:"
  4. check "Reconnect at logon" if you would like.
  5. click "finish"

Register a computer to the Duke wired or wireless network

Obtaining the MAC (hardware) address

Before you get started, you will need the user's MAC (aka hardware or physical) address.

For Windows

  1. Click the Start button
  2. Click Run
  3. Type in "cmd" (w/out the quotes) and click OK
  4. In the black box type, "ipconfig /all" (no quotes) and Enter
  5. You should see something like this example:
Windows IP Configuration
      
  Host Name . . . . . . . . . . . . : jonauman
        Primary Dns Suffix  . . . . . . . :
        Node Type . . . . . . . . . . . . : Peer-Peer
        IP Routing Enabled. . . . . . . . : No
        WINS Proxy Enabled. . . . . . . . : No
        DNS Suffix Search List. . . . . . : aas.duke.edu

   Ethernet adapter Wireless Network Connection:
        Media State . . . . . . . . . . . : Media disconnected
        Description . . . . . . . . . . . : Intel(R) PRO/Wireless 2200BG Network Connection
        Physical Address. . . . . . . . . : 00-12-F0-55-F8-88

   Ethernet adapter Local Area Connection:
        Connection-specific DNS Suffix  . : aas.duke.edu
        Description . . . . . . . . . . . : Broadcom NetXtreme 57xx Gigabit Cont roller
        Physical Address. . . . . . . . . : 00-11-43-76-94-3E
        Dhcp Enabled. . . . . . . . . . . : Yes
        Autoconfiguration Enabled . . . . : Yes
        IP Address. . . . . . . . . . . . : 152.3.58.xx
        Subnet Mask . . . . . . . . . . . : 255.255.255.0

   Default Gateway . . . . . . . . . : 152.3.58.1
        DHCP Server . . . . . . . . . . . : 152.3.250.12
        DNS Servers . . . . . . . . . . . : 152.3.250.1		152.3.250.2
        Primary WINS Server . . . . . . . : 152.3.58.91
        Lease Obtained. . . . . . . . . . : Thursday, January 19, 2006  9:24:14 AM
        Lease Expires . . . . . . . . . . : Friday, January 20, 2006 9:24:14 AM
I need the physical addresses to set up your wireless connectivity. From the example above, my wireless address is 00-12-F0-55-F8-88 and my wired address is 00-11-43-76-94-3E.

For Mac OSX

  1. Go to System Preferences
  2. Click on Network
  3. Where it says show, click on Built-in ethernet
  4. On the next screen, click on Ethernet
  5. Your Ethernet ID is the first address I need
  6. Go back and repeat again for your wireless card address by clicking on AirPort from the show drop down box.

For Linux

  1. Open up a terminal window
  2. Type /sbin/ifconfig
  3. You will see something like this
   eth0      Link encap:Ethernet  HWaddr 00:A0:D1:E4:53:22
          inet6 addr: fe80::2a0:d1ff:fee4:5322/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:634142 errors:0 dropped:0 overruns:0 frame:0
          TX packets:311838 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:81409293 (77.6 MiB)  TX bytes:306772114 (292.5 MiB)
          Interrupt:7
Use whatever comes after HWaddr. In this case, it is 00:A0:D1:E4:53:22

Wireless access

I usually only register the wireless card for working groups and meetings unless the user cannot use wireless or really need wired for some reason.

  1. Go to http://netreg.duke.edu/ and click on "Enter".
  2. Login with your NetID
  3. Click "Register New Machine"
  4. Under Select the Subnet, Select "TLS Wireless (152.3.149.0/24)"
  5. Next to hostname, give it a name of your choice. I usually do like GMOD1, GMOD2, etc, using a shortname for the visiting working group. If it is a staff member, I usually use their name. The name cannot contain spaces and shouldonly contain alphanumeric characters.
  6. Under hardware address, paste in the users MAC address (aka hardware address) for the wireless card.
  7. Under affiliation, select "National Evolutionary Synthesis Center"
  8. Hit Continue.
  9. You are done, and can now logout.

Please allow about 5 minutes for the connection to become active. You may need to repair the network conneciton on windows, or deactivate and reactivate the airport under OS X.

Wired access

You should not need to do this very often, but here are the insturctions anyways.

  1. Go to http://netreg.duke.edu/ and click on "Enter".
  2. Login with your NetID
  3. Click "Register New Machine"
  4. Under Select the Building, Select "Erwin Square Mill"
  5. Next to hostname, give it a name of your choice. I usually do like GMOD1, GMOD2, etc, using a shortname for the visiting working group. If it is a staff member, I usually use their name. The name cannot contain spaces and shouldonly contain alphanumeric characters. Also, you may have a choice of which domain to use. First choice is aas.duke.edu, if not available, then bootp.duke.edu.
  6. Under hardware address, paste in the users MAC address (aka hardware address) for the wired network card.
  7. Under affiliation, select "National Evolutionary Synthesis Center"
  8. Hit Continue.
  9. You are done, and can now logout.

Polycom

Use the audio PolyCom for teleconferencing

  • Phone number is 919-668-4568

Setup

The polycom has got two peices. One piece has the phone line, and connects to the wall. This is the smaller piece. The other piece is the voicepiece that looks like a triangle.

Connect the phone cord of the smaller piece into the analog wall jack. In conference rooms #1 & #2, this jack is under the table. In #3, it is near the window. Plugin the powercord.

Plugin the triangle unit. It will find the wall unit and once connected you should be able to get a dial tone.

Usage

  • Making a call
To connect to just one party, press the large button on the left hand side with the icon of a phone receiver. Dial the phone number with area code. You do not need to dial 9, but you will need an access code to dial long distance (oustide the 919 area code).
  • Making Conference calls
You may conference with two parties. Our setup does not allow more than that. To add a second party:
  1. While on an active call, press the Conference button . The first call is automatically placed on hold.
  2. Dial the number you wish to call. You may use the Redial or Direct Dial method.
  3. Press the Conference button or JOIN soft key to join the second call. To drop the second call, press the Conf key again.
-OR-
  1. Press the HOLD soft key to place the first call on hold.
  2. Press the Conference button and enter the number you wish to call. You may use the Redial or Direct Dial method.
  • Receiving a call: To receive an incoming call, just hit the phone button.
  • Answering a Second Call: If you are on a call when another call is received, you will hear a Call Waiting tone.
    • Press the Conference button (picture of a bunch of people, just under the phone button) to answer the incoming call. This first call will be automatically placed on hold.
    • Switch back and forth between calls using the conference button.

Consult the the full user manual for further details.

Use the PolyCom for a videoconference with collaborators outside the center

Setup

Setup the videoconferencing cart where you want. Make sure you are close enough to a network jack in order to connect the polycom unit. Plug in the master power cable in the back. Plug in the network cable.

Turn on the monitors with the silver remote control. You can each individual monitor by stepping close to that indiviual monitor and aiming directly at it, otherwise the remote will control both. By default the left hand side will show the remote connection, and the right hand side will show your local camera, or your laptop if connected and setup correctly (to be discussed later).

To turn off the machine, disconnect all calls, turn off the monitors, and unplug the machine.

Dial a call

Use the black remote. Simply enter the IP address or IP name in the dialing field, and press the green call button at the upper left hand corner.

File:Polycom7000-remote.png

You can call up to 4 different sites at one time. This is called a mutlipoint call. To place a multipoint call by adding sites to a call:

  1. Call the first site.
  2. When the call connects, press Call on the remote control.
  3. Select Add Video Call, and place a call to the next site.
  4. Repeat steps 2 and 3 until all sites are connected.

Receive a call

Our machine is setup to automatically answer incoming calls. But should you ever need to answer a call, simply press the green call button.

End a call

Simply press the red hangup button

To share your desktop application

Showing Content with a Visual Concert VSX or ImageShare II Before you show content, check that the computer video is configured to use one of these supported resolutions and refresh rates:

Resolution Refresh rates (Hz)

640 x 48060, 72, 75, 85
800 x 60060, 72, 75, 85
1024 x 76860, 70, 75, 85
1280 x 1024
(scaled and sent to the far site in 1024 x 768 format)
60

To set the resolution and refresh rate, go to your computer’s Display Control Panel.

To start showing content using a Visual Concert VSX:

  1. Connect the computer to a Visual Concert VSX device:
  2. Press the purple content button (lower left corner of remote) on the Visual Concert VSX, or press Graphics or Camera on the remote control.

File:Polycom7000-connect-laptop.png

To stop showing content using a Visual Concert VSX, press the purple button again.

Connect to a videoconference Polycom from your computer

Things you will need

  1. web cam
  2. microphone (if not built-in your webcam)
  3. H.323 client

Make sure you've got your webcam/microphone working properly before proceeding.

For Mac OS X 10.4

Xmeeting - you can install the latest version from the project's sourceforge site.

  • when the XMeeting Steup Assistant opens select "Continue"
  • in the Personal Information window enter your full name and select "Continue"
  • create a new location and select "Continue"
  • call the location name "NESCent" and select "Continue"
  • leave the bandwidth at "512" unless you know you are on a faster connection and select "Continue"
  • if XMeeting determines you are behind a NAT click "OK" otherwise skip the next step and select "Continue"
    • choose "use STUN" and select a server from the drop down box and click "Continue"
  • uncheck "enable SIP" and click "Continue"
  • choose "do not use a Gatekeeper" and click "Continue"
  • choose "do not use a Registrar" and click "Continue"
  • choose "enable video" and click "Continue"
  • choose "Finish"

Next, type in 'video.nescent.org' (without quotes) in the address field and hit the connect button. You should be able to connect.

File:Xmeeting-mainwindow.png

For further troubleshooting, you can read the documentation here.

For Mac OS X 10.3

ohphonex - you can install the latest version from here:

Once you've got it installed, the client will take you to a setup screen, in most cases defaults will work.
Next, type in 'video.nescent.org' (without quotes) in the address field and hit the connect button. You should be able to connect.

File:Ohphonex-window.png

For further troubleshooting, you can read the documentation here.

For Windows XP/ 2000

In Windows 2000, Microsoft NetMeeting is found by clicking Start, point to Programs, point to Accessories, point to Communications, and click NetMeeting.

In Windows XP, there is no shortcut by default. so you need to:
1. Click Start, then Run, and enter Conf.
2. Click OK.
3. In the NetMeeting Wizard, supply the necessary information, and then select the Put a shortcut to NetMeeting on my desktop (or on my Quick Launch bar) check box.

Next type in 'video.necent.org' in the call box and click on the phone icon.

File:Netmeeting.png

Sympodium

The following directions where taken from the "Sympodium ID370 Interactive Pen Display Installation Guide" which can be downloaded here Media:Sympodium ID370 Interactive Pen Display Installation Guide.pdf

Software Installation

  • If you haven’t done so already, turn on the computer and the interactive pen display.
  • Close all open applications on the computer.
  • Insert the SMART Board software CD into the CD drive.
For most systems, the CD is self-starting. If the CD doesn’t start automatically: (Windows operating systems) select Start > Run, and enter x:\autorun.exe (where x: is your CD drive).
(Mac computers) open your CD drive, and double-click the install file.
  • Follow the on-screen instructions.
NOTE: You’ll have to use the connected keyboard and mouse, because the pen doesn’t work until the SMART Board tools are running. If SMART Board software doesn’t recognize the interactive pen display, you may have to activate the port manually using an attached keyboard or mouse. For further information, read the SMART Board software online Help. Also, if the interactive pen display is your secondary monitor, you may need to enable it in your Display Properties Control Panel.

Hardware Connections

File:Sympodium ID370 Interactive Pen Display Quick Connect Guide.png